Port
Vietnam Shiprepair completed the repair of a deformed deck crane working platform on a feeder container vessel at Cai Mep Port after a container struck it during loading and unloading. The yard said the work complied with IACS class requirements and IMO guidelines, and was finished by certified welders and fitters without disrupting cargo operations or the vessel’s schedule.
VietNam Shiprepair completed replacement of a locally corroded cooling water pipeline on a Panamax bulk carrier at Van Phong Anchorage. The work was carried out under NKK Class supervision after long-term service caused localized corrosion and leakage, the yard said. It used NKK-approved welding procedures, certified welders and approved materials, and finished with pressure and operational testing and final NKK surveyor endorsement.
VietNam Shiprepair completed an overhaul of Crane No. 3 on a Panamax woodchips carrier at Ha Long Anchorage after the jib hoist winch drum bearings failed and stopped jib raising and lowering. The unit was dismantled at Cai Lan Port, sent to the yard’s Hai Phong workshop for reconditioning, then returned and reinstalled at Ha Long Anchorage with operational testing.
Vietnam Ship Repair published a 2026 ranking of the five largest container shipping companies by capacity and fleet size. MSC tops the list with about 7.3 million TEU and about 1,000 ships, followed by Maersk, CMA CGM, COSCO Shipping and Hapag-Lloyd.
VietNam Shiprepair completed an emergency underwater hull repair on a Panamax bulk carrier at PTSC Dung Quat Port after seawater entered Ballast Tank No. 4 through a puncture on the bottom of the ship, offset to port. The work, carried out under ABS Class supervision, included a diving survey, crack-arresting holes and welding of an 1200 × 300 × 10 mm doubler plate on the exterior hull.
VietNam Shiprepair completed a punctured tank top repair on a Panamax bulk carrier at Quy Nhon Anchorage after cargo fell back into the hold during loading and caused structural damage. The work was carried out under NKK Class supervision with NKK-approved steel, certified welding procedures and NKK-certified welders.
VietNam Shiprepair completed an overhaul of windlass block valves on a Capesize bulk carrier at Quy Nhon Port. The work, carried out under CCS Class supervision, replaced components that did not meet technical requirements and restored leak-free operation, the yard said.
VietNam Shiprepair said it completed a full replacement of a rubber feeder conveyor belt on a wood chips bulk carrier at Dung Quat Port. The vessel is classed by NKK, and the work was carried out under the direct supervision of the shipowner using the hot bonding method.
VietNam Shiprepair said it completed steel work on a 7-hold ABS-classed cargo vessel at Van Phong Anchorage, replacing a damaged deck plate section and the on-deck fire-fighting pipeline. The yard said the job was carried out under ABS surveyor supervision and finished without affecting the vessel’s schedule.
VietNam Shiprepair replaced a Bitzer 4GE-30Y-40P compressor on a container vessel at Da Nang Port and said the ship kept to schedule. The job restored full cooling performance on the vessel’s central air conditioning system.
VietNam Shiprepair replaced the upper rudder stock bearing on a small tanker at Cai Mep Port on 6 February 2026. The work was carried out under RINA surveyor supervision and, the yard said, finished on a tight schedule with no operational delay.
VietNam Shiprepair said it repaired a fractured deck crane jib at Ho Chi Minh Anchorage on 30 December 2025. The job used 10mm AH36 steel, NKK-approved welders and full NKK supervision, and the company said it finished with zero schedule disruption.